Pioneer SX-1050 Preamp Boards Rebuild Kit AWG-040 & AWG-041 Recap & Repair Kit
Up for sale here is this preamplifier boards rebuild set for a Pioneer SX-1050. This is all the parts you need to rebuild the four preamp boards in the Pioneer SX-1050--the AWM-089 filter amp board, AWG-040 flat amp board, the AWG-041 tone amp board, and the AWS-094 switch assembly board (only one cap on that board). Over time the preamp boards start developing issues with transistors and capacitors. The old parts are weak and failing. We will make them new again! This kit includes all 47 capacitors and all 12 transistors. It does NOT include replacements for the 2SK30 FETs, which don't need to be replaced unless they're malfunctioning. These are all high-quality brand new genuine parts. The capacitors are Nichicon PW, Nichicon KL, and Wima film caps at the correct uf and the same or higher voltage ratings, and the transistors are new Fairchild/Onsemi and are the correct subs for the original transistors/diodes. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Pioneer gear. Frankly, "recapping" is a waste of time if you're not going to replace the transistors as well. A lot of times the transistors age worse than the caps, so you should definitely change out the transistors while you're in there. If you have a crackle on one or both channels that goes away when you pull out the rear preamp jumpers, it's probably a bad preamp transistor. I will include a surprisingly well-written instruction sheet, but this is a pretty complicated repair, so if you don't have much experience with this, buy the kit and take it to a professional. You should definitely have a fair amount of soldering experience and have a decent soldering iron and a dim-bulb tester with 100W bulb, as well as the usual tools. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Featured Refinements | Pioneer SX |
| Brand | Pioneer |
Up for sale here is this preamplifier boards rebuild set for a Pioneer SX-1050. This is all the parts you need to rebuild the four preamp boards in the Pioneer SX-1050–the AWM-089 filter amp board, AWG-040 flat amp board, the AWG-041 tone amp board, and the AWS-094 switch assembly board (only one cap on that board). Over time the preamp boards start developing issues with transistors and capacitors. The old parts are weak and failing. We will make them new again! This kit includes all 47 capacitors and all 12 transistors. It does NOT include replacements for the 2SK30 FETs, which don’t need to be replaced unless they’re malfunctioning. These are all high-quality brand new genuine parts. The capacitors are Nichicon PW, Nichicon KL, and Wima film caps at the correct uf and the same or higher voltage ratings, and the transistors are new Fairchild/Onsemi and are the correct subs for the original transistors/diodes. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Pioneer gear. Frankly, “recapping” is a waste of time if you’re not going to replace the transistors as well. A lot of times the transistors age worse than the caps, so you should definitely change out the transistors while you’re in there. If you have a crackle on one or both channels that goes away when you pull out the rear preamp jumpers, it’s probably a bad preamp transistor. I will include a surprisingly well-written instruction sheet, but this is a pretty complicated repair, so if you don’t have much experience with this, buy the kit and take it to a professional. You should definitely have a fair amount of soldering experience and have a decent soldering iron and a dim-bulb tester with 100W bulb, as well as the usual tools. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
